Nortel Networks 6.1 manual Using the Administration set to control alarms, To exit

Using the Hospitality features / 191

Using the Administration set to control alarms

Only a Hospitality Services set can use this alarm administration feature. This feature is also associated with a room number, and cannot be used on common sets.

Use this feature to:

•query a current or last alarm time set for a room

•assign an alarm time for any room

•change an alarm time for any room

•cancel an pending alarm for any room

To program the alarm, follow these steps:

1.Press

2.Enter ￿the Desk°‡‡admin.password if you are prompted for a password. The set displays: al of rm#:

3.Enter the room number.

4.Press VIEW. The set displays Alrm: 07:00am OFF:.

If the alarm time is correct, press the ON/OFF display key.

If you want to change the time, enter a new four-digit alarm time. If the clock uses a 24-hour format, enter an hour between 00 and 23, and minutes between 00 and 59. The set displays: Alarm ON hh:mm If the clock uses a 12-hour format, enter the time, then when the set displays: hh:mm AM or PM?, press AM or PM. The set displays: Alarm ON hh:mm.

5.	Press	to exit.
P0603544 02	®	Compact ICS 6.1 System Coordinator Guide