Nortel Networks 6.1 manual Priority, Release a call Use line pool?

Common feature displays / 255

Priority> 21

BLOCK

Release a call

Use line pool?

YES NO

Hold or release

Release calls

Line in use

No button free

Make calls first

You are receiving a priority call. If you are on another call, inform the person you are speaking to that the call is about to be put on hold. Press the flashing line indicator of the priority call or wait until the call connects automatically (in eight seconds). The priority call goes through when you hear the next beep. Your active call is placed on Exclusive Hold. It is reconnected automatically when the priority call ends (unless you transfer the priority call, in which case you must press the line button of your original call to

reconnect). Use DND () or press BLOCK to reject a priority￿call°fi.

You have no free line buttons on which to receive a call. Release one of your current calls and try again to answer the incoming call.

You have received a Ring Again offer for a line pool. Press the flashing internal line button or YES to use the line pool. On M7100 or T7100 telephones, just lift the handset. Otherwise, press NO or wait 30 seconds for the Ring Again offer to expire.

You cannot program a feature button while you are on a call.

You have tried to use a feature while you were on a call or had calls on hold. Release the call or calls, before using the feature.

The line is in use. Make the call using normal methods or wait until the line is free.

You have tried to make, receive or pick up a call when no line button was available. Some features require you to have a button free. Releasing calls can free up line buttons.

The feature you tried to use requires you to be on an active call at your telephone. This display also appears when information about a call has been cleared by a system reset.

P0603544 02 Compact ICS 6.1 System Coordinator Guide