Nortel Networks 6.1 manual Isdn BRI terminals, Network Call Diversion profile, Mcid prompts

ISDN / 215

MCID prompts

Call traced

No response

Not incoming

Not available

Not subscribed

Invalid state

Not allowed

The MCID request was accepted by the network.

No response to the MCID request.

MCID can only be invoked on received calls.

The caller information is not available. The CO is not able to log the information or it is not an ETSI BRI type of call.

MCID feature is not subscribed to.

MCID is not allowed in the current state of the call.

Invalid interaction with another supplementary service.

Network Call Diversion (profile 2)

This feature is a network function that allows forwarding and redirection of calls outside the Norstar network when using an ETSI ISDN line. Functionality is similar to that of External Call Forward (ECF). NCD redirects calls using the same line on which they arrive. Call forward is efficient since there is no need for additional outside lines.

ISDN BRI terminals

Your Compact ICS supports up to eight Basic Rate Access loops (four 2B+D channels) that can be used for fully digital connections to ISDN networks and devices. Loops are connections between the ICS and devices or between the ICS and the network.

Each loop provides two separate B-channels that can be used to make two simultaneous voice or data calls, or one data call and one voice call.

P0603544 02 Compact ICS 6.1 System Coordinator Guide