Nortel Networks 6.1 manual Changing handsfree for a telephone, HandsfreeNone, HandsfreeAuto

68 / Answering calls

Changing handsfree for a telephone

You can program the type of handsfree used with each telephone.

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press		.
2.	Press	￿••¤flfl‹››
			(the default System Coordinator password).
3.	Press ≠and enter the internal number of the telephone you
	want to program.
4.	Press ≠twice.
5.	Press ‘three times.
6.	Choose a setting at Handsfree: using the CHANGE button.

There are three ways to set handsfree for an individual telephone:

Handsfree:None	Handsfree is not available to the telephone.
CHANGE
	You can make or answer a call without having to
Handsfree:Auto
CHANGE	pick up the handset or press the button labeled
	handsfree/mute. The internal microphone and
	speaker of the telephone turn on automatically
	when you press a line or intercom button to make
	or answer a call.
Handsfree:Std	A standard version of handsfree described ‘‘Using
¤‹fl›flhandsfree/mute’’ on page 65. Not available for
CHANGE	T7316E telephones.
	This prompt appears if you attempt to use
Need Handsfree
	handsfree or headset and the telephone not been
	configured with Auto under Handsfree.

For other displays, see ‘‘Common feature displays’’ on page 253.

Both Auto and standard handsfree allow you to use a headset with a Norstar or BST telephone.

Compact ICS 6.1 System Coordinator Guide P0603544 02