Nortel Networks 6.1 manual Enter code, Feature code, Feature moved

150 / Customizing your telephone

Displays

	<Feature name>			The name of the feature assigned to a button is
		SHOW	OK	displayed when you press the button. SHOW
				appears when there is more information
				available. Press		or SHOW for additional
				information.
				If you are checking a speed dial button, enter
	Enter code:
				the three-digit speed dial code that you want to
				check.
				Enter the feature code, or press			or QUIT to
	F__
	QUIT	CLEAR		quit programming or CLEAR to clear the numbers
				you have entered. The system accepts the
				entry as soon as you enter a valid feature code.
				Press	and enter the feature code you want
	Feature code:
	QUIT			to assign to the button. You cannot enter invalid
				codes.
				You have programmed a button with a feature
	Feature moved
				that was already programmed onto another
				button. The feature has moved to the button
				you just programmed. Its original button is now
				blank.
				Press the button you want to check. Press
	Press a button
	EXIT			or EXIT when you are finished.
						£
				Enter the number you want to program and
	Program and HOLD
				press	. To erase the button, just press
				.
				Enter the number you want to program and
	Program and OK
	QUIT		OK	press OK. To erase the button, just®press				￿
				or OK.
	For other displays, see ‘‘Common feature￿displays’’ on page 253.
Compact ICS 6.1 System Coordinator Guide				￿	￿		P0603544￿02