Nortel Networks 6.1 manual Turning the redirect ring for a telephone on or off

Forwarding your calls / 125

Turning the redirect ring for a telephone on or off

You can program a telephone to ring briefly (200 milliseconds) when a call is redirected on one of its lines.

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press	.
2.	Press	(the default System Coordinator password).
3.	Press ≠and enter the internal number of the telephone you
	want to program.
4.	Press ≠twice.
5.	Press “twice. The display shows Redirect ring:.
6.	Press CHANGE to select Y (Yes) or N (No).

Tip - If a telephone has redirect ring enabled, it rings briefly for redirected calls on one of its lines even if another telephone set up the line redirection.

Displays while redirecting lines

	Intercom					Youselectedtheintercombuttonasthefacilityto
						place the call on. Enter a line pool code or a
			￿••¤flfl‹››
			destination code.
	¤‹fl›fl						or ADDtobeginredirection.Press £or
	Line Redirection				Press
	QUIT	ADD		REMOVE		REMOVE to cancel a previous redirection.
						You have one external line on your telephone,
	No line to use
						but you need a second line to performline
						redirection. Redirect your external line using a
						line pool as the outgoing line.
						You are attempting to redirect a line and the line
	Outgoing line
						you have chosen is the outgoing line you have
						selected as a destination. You cannot redirect a
						line to itself. Select another line.
P0603544		02				•	Compact ICS 6.1 System Coordinator Guide