Nortel Networks 6.1 manual Displaying Call Information before or after answering

Answering calls / 55

Once you answer a call, new calls coming in on lines configured with CLID to telephones with CLID allowed, present the prompt: LineXXX Calling for two rings, and then the CLID of the caller will display for three seconds (XXXXX).

If the call is being forwarded, the CLID will also display the number from which the call was forwarded (XXXXX>YYY).

This transient prompt will disappear if you press a programmed feature key, external autodialer, answer key, feature key, line key, intercom key, any dialpad key, shift key (M7310), or handsfree key. As well, an incoming Priority call or Voice call will clear the display and display the information for the Priority or Voice call.

Displaying Call Information before or after answering

To find out who is calling or to display information about your current call:

1.	Press	.
2.	Press	￿°⁄⁄
		or VIEW to display more information about an external call.

		£
Call Display information becomes available between the first and second
ring of an incoming call. If you answer before the Call Display information
is available on your display, and you press						, you see only
the line number or line name.					￿°⁄⁄
Displaying Call Information for a call on hold
1.	Press		. The display shows ˆSelect a call.
		£￿°⁄⁄				£
2. Select the line on hold. Information about the call is displayed.
3.	Press		or VIEW to display more information about an external call.
		Tip - If your telephone automatically displays Call
		Display information for a call, you need to press
				before you can press		or VIEW to
		display more information about the call.
P0603544	02				Compact ICS 6.1 System Coordinator Guide