Nortel Networks 6.1 Programming room information, Service times, Press ≠ . Show set displays

Using the Hospitality features / 187

Programming room information

Use this setting to assign set DNs to a specific room.

1.Place the appropriate programming overlay on the set you are using to do programming.

2.	Press	(CONFIG). The display shows
	Password:.
3.	Press	(ADMIN). The display shows
	Terminals&Sets.
4.	Press ‘until the display shows Hospitality.
5.	Press ≠until Room/desk info displays.
6.	Press ≠. Show set: displays.
7.	Enter a room set number or press LIST and press ‘until you
	find the DN of the set you want to assign to a room.
8.	Press ≠. Room #:None displays.
9.	Press CHANGE and enter the room number, then press OK.
10.	Press ‘. Adm pwd req’d:Y displays
11.	Press CHANGE and choose Y or N, depending on your security
	requirements.

Call restrns￿¤‹fl›fl••¤flfl‹››

Call restrictions can be set up by the system administrator. Refer to the Compact ICS Installer Guide for details.

Service times

You can set the time when occupied rooms change from Service done to Service required. This setting affects the Room condition feature.

1.Place the appropriate programming overlay on the set you are using to do programming.

2.		Press	(CONFIG). The display shows
		Password:.
P0603544	02	￿••¤flfl‹››	Compact ICS 6.1 System Coordinator Guide