Nortel Networks 6.1 manual Using the Hospitality features, Hospitality passwords, Desk pswd

Using the Hospitality features

This section describes the Hospitality Services feature which is used to administer room and alarm services in small to medium-sized facilities such as hotels, motels, or hospitals.

There are three types of sets that make up this type of system:

Common set—this telephone can be found in the lobby, office, or common area, and is not associated with a room. This type of telephone is used for public access, and cannot access the admin or room features.

Room set—this telephone resides in a specific room and can be used by both guests and cleaning staff to set alarms or to indicate room condition. Up to five telephones can be assigned to the same room number, such as for fax lines, internet dial-up, etc.

Administration set—this telephone must be a two-line display telephone and is usually configured with a password to allow secure administration of room occupancy and condition services and alarm services.

Hospitality passwords

There are two passwords within the hospitality feature. One provides secure access to the administration set, and one provides secure access to a room condition setting from each room set for housekeeping staff.

Desk pswd

Change this password frequently, to maintain security.

1.Place the appropriate programming overlay on the set you are using to do programming.

2.		Press		(CONFIG). The display shows
		Password:.
3.		Press	(ADMIN). The display shows
P0603544	02	Terminals&Sets¤‹fl›fl￿••¤flfl‹››.		Compact ICS 6.1 System Coordinator Guide