Nortel Networks 6.1 manual Turning Services on and off using feature codes

Using System features / 221

you decide to run a service on a schedule, the system uses the start and stop times used for that schedule.

An example of how to turn on a Service manually

You may have Ringing service (your night service) set up to run according to the Night Schedule. You may decide you want that ringing arrangement to come into effect only when it is turned on and off manually.

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press	.
2.	Press	￿••¤flfl‹››
		(the default System Coordinator password).
3.	Press ‘twice. Services displays
4.	Press ≠. Ringing Service displays.
5.	Press ≠. The display reads Sched:Nightˆ.
6.	Press ≠and use CHANGE to set the Service to Manual.

Night Schedule for Ringing Service no longer follows the schedule but can be turned on and off by using the feature code and selecting Night Ringing. See ‘‘Turning Services on and off using feature codes’’ on page 221.

Turning Services on and off using feature codes

The master control for services is in programming. See ‘‘Turning Services on and off’’ on page 220. Day-to-day use of Services is controlled using the following feature codes.

		Turns on Ringing service. When used at the direct-
		dial telephone, it activates the alternate direct-dial
	¤‹fl›fltelephone (extra-dial telephone).
‹¤‹¤⁄		Turns off Ringing service.
		Turns on Restriction service.
		Turns off Restriction service.
P0603544￿£02°‡⁄
		Turns on Routing service.
		Turns off Routing	service.
			Compact ICS 6.1 System Coordinator Guide