192 / Using the Hospitality features

Using the alarm

To set an alarm on a digital telephone:

1.

Press

 

The displays shows Alrm:07:00 OFF

 

2.

Do one of the following:

 

 

If the alarm is correct, press ON/OFF.The set displays: Alrm:07:00am

 

ON. Press DONE to exit.

 

 

If you need to change the alarm time, press CHG. The set displays:

 

Enter time:

 

 

 

3.

To enter a new time, do one of the following:

 

 

If the clock uses a 24-hour format, enter an hour between 00 and 23,

 

and minutes between 00 and 59. The set displays: Alarm ON hh:mm

 

If the clock uses a 12-hour format, enter the time, then when the set

 

displays: hh:mm AM or PM?, press AM or PM. The set displays: Alarm ON

 

hh:mm.

 

 

 

To set an alarm on an analog set:

 

1.

Press ˚

. A tone sounds.

 

2.

Enter a four-digit alarm time:

 

 

If the clock uses a 24-hour format, enter an hour between 00 and 23,

 

and minutes between 00 and 59. A tone sounds.

 

 

If the ￿clock°‡fiuses a 12.-hour format, enter the time, then press

to

 

select am or

to select pm. A tone sounds.

 

To enter a new time, repeat the above steps and enter a new time. This overwrites the existing entry.

Canceling an alarm

Canceling the alarm time for any telephone cancels the alarm time for all the sets in the same room.

Digital set: Press

P0603544

 

Analog set: Press ˚

 

Compact ICS 6.1 System Coordinator£￿Guide£°‡fi°‡fi.£°‡fi.

02

Page 192
Image 192
Nortel Networks 6.1 manual Using the alarm, Canceling an alarm, Enter time, Hhmm, Analog set Press ˚