Nortel Networks 6.1 manual Canceling Line Redirection, Allowing a telephone to redirect calls

124 / Forwarding your calls

Tip - The line chosen for redirecting calls on other lines can be used normally when it is not busy on a redirected call. To avoid redirection failing because the chosen line is in use, choose a line pool with several lines in it.

The system does not check that the number you give for line redirection is a valid one. If you redirect to an invalid number, redirection fails. Using an autodial button to enter the redirection number helps avoid this possibility. An autodial button used for line redirection must be programmed to use a specific line.

Canceling Line Redirection

1.	Press	.
2.		￿£°›
	Select the lines you no longer want to be redirected.

Allowing a telephone to redirect calls

You can turn the redirect calls feature on and off.

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press		.
2.	Press	(the default System Coordinator password).
3.	Press ≠and enter the internal number of the telephone you
	want to program.
4.	Press ≠twice.
5.	Press “three times. The display shows Allow redirect:.
6.	Press CHANGE to select Y (Yes) or N (No).
¤‹fl›fl￿••¤flfl‹››
Compact ICS 6.1 System Coordinator Guide			P0603544 02