Nortel Networks 6.1 manual Calling the number your calls are forwarded to, Automatic Call Back

P0603544 02

Compact ICS 6.1 System Coordinator Guide

214 / ISDN

Calling the number your calls are forwarded to

1.Select an ISDN line by selecting a line button, a line pool, or the handsfree button, or by lifting the handset (if an ISDN line is your prime line).

2.Consult your service provider for the appropriate feature code to enter on your dialpad.

Automatic Call Back

If you call a number that is busy, enter the feature code designated by your service provider to receive a distinctive ring at your set when the line becomes available for calls.

Automatic Recall

Automatic Recall allows you to automatically dial the number of the last call you received. You may not see the number on the display if the information is not available from your service provider, or you do not have Caller ID as part of your ISDN service.

Consult your service provider for the appropriate feature code to enter on your dialpad.

MCID (profile 2)

The MCID feature allows you to useto have call information recorded on the central office￿°·‡system for an incoming call on a specific line (EUROISDN lines, only) .

The user must invoke the feature code either during the active call or within within 30 seconds (time varies on different networks) after the caller hangs up, but before the user hangs up.