Nortel Networks 6.1 manual Map for working in programming

24 / Getting started with Norstar

A map for working in programming

The programming maps on page 25, page 26, and page 27 show the headings you see when you move through the display menu

after pressing	and entering the
password (the default password is	or
). The maps show you the menu choices.

A Basic password can be used with a limited number of feature

codes, includingand the codes for turning call services on and off. For more information, see ‘‘Using passwords’’ on page 225.

			Customize the many features used by telephones.
	Terminals&Sets
			You can change where a call is forwarded, give a
			telephone a name, or allow certain features to be
			used at a telephone.
			Program names for each line.
	Lines
			Turn services on or off. These are Ringing service,
	Services
			(often called night service) that allows additional
			telephones to ring, Restriction service that blocks
		￿••Ç؈ÏÈÌcertain kinds of calls and Routing Service that
¤‹fl›fl			decides whatÅΘȈlines a call uses.
			Program up to 255 different telephone numbers so
	Sys speed dial

	that people in your office can dial them with a
	three-digit code.
	••ÊȘ‰Change the password you use for programming,
Passwords
	or erase a Call log password.

Time&Date

System prgrming

Change the time, date, or both.

Change the settings for the System Answer that handles the overflow when the attendant set is busy, and Custom Call Routing (CCR) that gives a caller a choice of where to direct their call.

Compact ICS 6.1 System Coordinator Guide P0603544 02