User Preferences / 167

CHANGE Used when you are setting up an external autodial number. Press CHANGE until you see the type of line or pool you want the number to use.

FEATR Press to store a feature code on the button.

FIND Locates a specific button on a telephone by entering its number. Button numbers are shown in the illustrations.

LIST Takes you to a list of feature codes. Press to move through the list and press OK when you see the feature you want to program on the button.

Information about individual displays you may see is described at the end of this section.

Changing a User Speed Dial

1.Press at User Speed Dial. The display shows the number of speed dial codes that are available.

2.Press to see the first speed dial code (256).

3.Press to move through all the speed dial codes.

4.Press at the code you want to change.

5.Press CHANGE and enter the telephone number the same way you would dial it on the telephone.

6.Press OK.

7.Press and choose the line (or enter a code for a line pool) the speed dial code should use.

Use the line pool code to select a particular line pool for use with Speed Dial. If you select Use routing tbl, a line or pool is chosen by the routing programming according to the initial digits in the number.

The route you choose for a User Speed Dial code must be one that the telephone can use. For example, if the telephone does not have access to Line Pool B and you use that pool code with the speed dial code, the code does not work. Lines and line pools are assigned to the telephones by the system administrator. Refer to the Compact ICS 6.1 Installer Guide for details.

To change a system speed dial code, see ‘‘Adding or changing a system speed dial’’ on page 31.

P0603544 02

Compact ICS 6.1 System Coordinator Guide

Page 167
Image 167
Nortel Networks 6.1 manual Changing a User Speed Dial