Rosewill RNX-B100 user manual Driver Installation, For Windows XP

Compact Bluetooth v2.0 USB Adapter RNX-B100 User Manual

Driver Installation

For Windows® 2000

IMPORTANT: You must install the software before installing the Bluetooth device. During the software installation, you will be prompted to install the device.

Place the installation CD into a CD-ROM drive and setup should launch automatically. If setup does not launch, use Windows Explorer to navigate to the appropriate CD-ROM drive and run “setup”.

1.Click the Install icon.

2.Follow the installation wizard and complete the steps to install Bluetooth software.

3.On the Welcome screen, click the Next button.

4.When the License Agreement screen is displayed, read the License Agreement, then clicks the radio button to the left of “I accept the terms in the license agreement” and click the “Next” button.

5.The system is ready to install the Bluetooth software. If you need to review or change any settings, click the “Back” button. Click the “Cancel” button to exit the Wizard. Otherwise, click the “Install” button.

6.During installation, system will try to detect your Bluetooth device. Plug in your Bluetooth device securely when prompted and click “OK” to continue, or you can click “Cancel” to continue the installation if you don’t wish to plug in the Bluetooth device.

7.If you click “OK”, the installation program will install the driver for the Bluetooth device automatically.

8.When the installation is completed, click “Finish”.

9.Click “Yes” to restart your computer. If you plan to restart later, click “No”.

For more information about the Bluetooth software configuration, please

follow the steps on below:

z Run Start→ Programs → Bluetooth→User’s Guide

For Windows® XP

The Microsoft Bluetooth stack comes with included with Service Pack 2 for Windows XP. If you already have Service Pack 2 installed, you may choose not

3