Nortel Networks 6.1 manual Setting the name, Allowing/disallowing an auxiliary ringer, Ringer

to exit or ‘to continue programming.

178 / Programming Hunt Groups

6.Press CHANGE to change the overflow position.

7.Enter the new overflow position.

8. Press

Setting the name

This setting allows you to program the Hunt Group name, such as SERVICE or SALES. The name can be up to seven characters in length. This name becomes the CLID display name when the DN is called.

1.	At Hunt groups, press ≠. The display shows Show group.
2.	Enter the Hunt Group number you want to program (1-6) or press
	‘to scroll through the groups.
3.	Press ≠. The display shows Member DNs:.
4.	Press ‘. The display shows Name:.
5.	Press CHANGE.
6.	Using the dialpad, enter the name of the Hunt Group.
7.	Press ‘to store the name.
8.	Press ®to exit or ‘to continue programming.

Allowing/disallowing an auxiliary ringer

This setting allows you to allow/disallow an external ringer to sound when a call comes in for a specific hunt group. If you allow this service, you must have an auxiliary ringer properly installed on your system. Refer to ‘‘Using an auxiliary ringer’’ on page 232.

1.	At Hunt groups, press ≠. The display shows Show group.
2.	Enter the Hunt Group number you want to program (1-6) or press
	‘to scroll through the groups.
3.	Press ≠. The display shows Member DNs:.
4.	Press ‘until the display shows Aux. Ringer:.
5.	Press CHANGE to choose Y (yes) to turn the ringer on or N (No) to
disallow®an auxiliary		ringer.
Compact ICS 6.1 System Coordinator Guide			P0603544 02