Nortel Networks 6.1 Room/desk information, Cond pswd, Press ‘until the display shows Hospitality

186 / Using the Hospitality features

4.Press ‘until the display shows Hospitality.

5.Press ≠. Desk pswd: displays. (default is 4677)

6.Press CHANGE. New pswd: displays

7.Enter a new password, then press OK.

Cond pswd

Change this password frequently, to maintain security.

1.Place the appropriate programming overlay on the set you are using to do programming.

2.	Press		(CONFIG). The display shows
		￿••¤flfl‹››
	Password:.
3.	Press	¤‹fl›fl	(ADMIN). The display shows
	Terminals&Sets.
4.	Press ‘until the display shows Hospitality.
5.	Press ≠.
6.	Press ‘.Cond pswd:None displays.
7.	Press CHANGE. New pswd: displays
8.	Enter a new password, then press OK.

Room/desk information

There are two aspects to programming room information.

• First you must program specific DNs to a specific room and set up the room occupancy filters, which determine what types of calls can be made from a room set at various states of occupancy.

Note: You can assign up to five DNs to the same room number.

• Then you need to administer the room occupancy and state of the room.

Compact ICS 6.1 System Coordinator Guide P0603544 02