Nortel Networks 6.1 manual Time savers for making calls, Press To program an external number or

Auto Attendant / 97

Time savers for making calls

Storing a number on a memory button for Autodial

You can program memory buttons for one-touch dialing of internal or external telephone numbers.

Buttons used for lines, answer DNs, or handsfree/mute cannot be used as autodial buttons.

If the power to your Norstar system is off for more than three days, autodial numbers (as well as some other system programming) may be lost from the memory.

Adding an autodial button

			or
1.	Press	to program an external number or	￿•¤for an
	internal number.
2.	Choose a button and then enter the number as if you were dialing it.
When programming Autodial you can use:
•	Last Number Redial
•	Saved Number Redial
•	destination codes (choose the button with the ∆label as the
	line)
•	host system signaling

Choosing a line for Autodial

To include￿a line•⁄selection for an external number,￿press•⁄￿the line•¤or intercom button before you enter the number. To select a line pool, press a programmed line pool button, or press the Intercom button and enter a line pool access code.

If you select a line before pressing the autodial button, the call goes out on the line you have selected instead of the line that is part of the autodialer programming.

P0603544 02 Compact ICS 6.1 System Coordinator Guide