Nortel Networks 6.1 Splitting a conference, Removing yourself from a conference, Parties only

Answering calls / 63

Splitting a conference

You can talk with one person while the other person is on hold.

On a T7316, T7316E, M7208, M7310 or M7324 telephone:

1.Press the line button of the person you want to speak to. The other person is automatically put on hold.

On an M7100 or T7100 telephone:

1.	Press	. The first party is on hold.
2.	Press	, if necessary, to switch parties.
You can re-establish the conference.
1.	Press ￿.
2.	Take the held call off hold. This is not necessary for the M7100 or
	T7100 telephone.

Removing yourself from a conference

You can remove yourself from a conference, and connect the other two callers through your Norstar system.

Enter the Transfer feature code.

When you remove yourself from a conference using the Transfer feature, and both callers are from outside your system, one of the callers must have called you on a disconnect supervised line, or the call is disconnected.

Displays

	3 parties only		You are trying to add a fourth party to your
			conference call, or to join two conferences
			together. Release one call from the conference
		£‹before adding another, or keep the two
			conferences separate.
			You have put a conference call on hold.
	Conf. on hold
			You have tried to make a conference call, but your
	Conference busy
			system is already handling its maximum of four
			conference calls.
P0603544 02			￿‡‚	Compact ICS 6.1 System Coordinator Guide