Nortel Networks 6.1 Changing and adding System Speed Dials, Adding or changing a User Speed Dial

Auto Attendant / 101

Changing and adding System Speed Dials

System Speed Dial codes are numbered from 001 to 255. The system coordinator assigns numbers to System Speed Dial codes for the entire system. See ‘‘Adding or changing a system speed dial’’ on page 31.

Tip - There is no difference between using User Speed Dial and using System Speed Dial. They differ only in how you program them.

Adding or changing a User Speed Dial

To add or change a User Speed Dial number on your telephone:￿•›

1.		Press		.
2.		Enter a three-digit code from 256 to 279 that you want to associate
		with a telephone number.
3.		To include a line selection for this number, press the line or intercom
		button. To select a line pool, press a programmed line pool button, or
		press the Intercom button, and enter a line pool access code. For
		M7100/T7100 telephones, you can only select a line pool.
4.		Enter the number you want to program.
5.		Press		or OK.
Displays
					Continue entering the number you want to
	256:9___
	CANCL	BKSP		OK	program.Youcanchangethenumberbypressing
					BKSP or		. When you are finished,
					press	or OK.
	Enter digits				Enter the telephone number you want to program
	QUIT			OK	exactly as you would if you were dialing it
			￿•›normally. When you are finished, press					or
			￿		OK.	￿￿Compact ICS 6.1 System Coordinator￿Guide
P0603544 02