Nortel Networks 6.1 manual Turning on Line Redirection

Forwarding your calls / 123

Line Redirection

Line Redirection allows you to send your external calls to a telephone outside the office. You may choose to redirect all your external lines or only some of them.

Line Redirection takes precedence over the Call Forward feature. If both features are active on a telephone, incoming external calls on redirected lines are routed to the specified Selective Line Redirection (SLR) external destination. Incoming internal calls are forwarded to the specified Call Forward destination.

You cannot use the Line Redirection feature at either M7100 or T7100 telephones, or a telephone connected to an ATA.

Turning on Line Redirection

1.	Press		.
2.		￿°›
	Select the outgoing line to be used for redirected calls.
3.	Enter the number to which calls are to be redirected (the ways you can
	do this are listed below).
4.	Select the lines to be redirected.
Enter the telephone number to which you want to redirect calls by using
one of the following methods.
•	Press an external autodial button.
•	Enter an external telephone number (using no more than 24 digits)
	then press		or OK.
•	Press	or OK if the line you have chosen as the outgoing line is a
	private network line that does not require you to dial digits.
If you use ALL to redirect all your lines, it is important that you wait until
all the lines on your telephone light up before pressing				or OK. If you
press		or OK before all the lines light up, those lines not lit are not
redirected.
P0603544 02	￿￿￿		Compact ICS 6.1￿System Coordinator Guide