Nortel Networks 6.1 manual Using special telephones, Direct-dial, Press ≠at Terminals&Sets, None

228 / Using System features

Using special telephones

Direct-dial

You can reach the direct-dial telephone by dialing a single digit. The direct-dial telephone is usually in a central location, such as a attendant's desk. It is usually the prime telephone or the central answering position (CAP).

The direct-dial telephone can send up to 30 messages and can invoke Services to activate the extra-dial telephone.

You cannot forward calls to a direct-dial telephone that is outside your Norstar system. See ‘‘Making changes to Call Forward No Answer’’ on page 37.

Note: ISDN terminals cannot use the Direct-Dial digit to reach a Direct- Dial set.

Changing the direct-dial telephone assignments

Your installer or customer service representative sets up the direct-dial telephone.

You can change which direct-dial telephone a telephone is assigned to, or assign it no direct-dial telephone.

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press	.
2.	Press	(the default System Coordinator password).
3.	Press ≠at Terminals&Sets.
4.	Enter the internal number of the telephone you want to program and
	press ≠. The display shows Capabilities.
5.	Press ≠.
6.	Press ‘until the display shows D-Dial.
7.	Press CHANGE to select either Set1 or		None.
Compact ICS 6.1 System Coordinator¤‹fl›fl￿•Guide•¤flfl‹››			P0603544 02