Nortel Networks 6.1 manual Making a callusing Call Log, Creating a password to your Call Log

142 / Tracking your incoming calls

If you accidentally erase an item, you can retrieve it.

1.	Press	￿	or UNDO immediately after accidentally erasing an item.
2.	Press		to exit.

Making a call®using Call Log

You may find it helpful to place calls from within your Call Log. The number stored for each call may vary depending on the type of call. For example, if the call was placed from a Centrex or PBX system, the first few numbers may need to be trimmed before you can make the call. If the number you want to call is long distance, or if you want to use a line pool, you may need to add numbers.

To place a call
1.	Display the log item for the call you want to place.
2.	Display the associated telephone number.
3.	Press		or TRIM, once for every digit that you want to
	remove.
4.	Dial any extra digits required.
5.	Press an external line or line pool button.
6.	Lift the handset. (This is not necessary if handsfree is programmed at
	your telephone.) The displayed number is dialed.
Creating a password to your Call Log
You have the option of accessing your Call Log through a password.
1.	Press		. The displays shows New passwrd:.
2.	Enter your four-digit password. The display shows Repeat New:.
3.	Re-enter your four-digit password. The display shows			￿•°fi
	Password changed, which confirms that your password has been
	assigned.
		￿
Compact ICS 6.1 System Coordinator￿•°fiGuide				P0603544 02