Nortel Networks 6.1 manual Using intercom as the line for Autodial, Quit Bksp

98 / Auto Attendant

For the M7100 or T7100 telephone, an external autodialer can be programmed only by using a line and not a line pool.

Tip - If you do not include a line selection in an autodial number, the call uses your prime line (if you have one).

Using intercom as the line for Autodial

If you press the button with the ∆label as the line for an external autodial number, you must include a valid line pool access code or a destination code. If line pool access codes or destination codes are changed, remember to reprogram autodial numbers.

Displays

	987__			Continue to enter digits until the number is
	QUIT	BKSP	OK	complete.Press		or BKSP to erase an
				incorrect digit. Press		or OK when you are
				finished.
				The memory allotted to autodial numbers in your
	Autodial full
				Norstar system is full.
				While programming external Autodial, you
	Button erased
				erased the button by pressing			or OK before
				entering any digits.
				Enter the number you want to program (choosing
	Enter digits
	QUIT		OK	the line first if necessary) exactly as you would if
				you were making a call.
				Enter the internal telephone number you want to
	Intercom #: ___
	QUIT			program.
				You are programming an internal autodial button
	Invalid number
				and have entered a number that is not an internal
				number on your system. Enter a valid internal
				number. If the number you are entering is a
				destination code, use external autodial.
				Press the memory button you want to program.
	Press a button
	QUIT				￿		￿
Compact ICS 6.1 System Coordinator Guide							P0603544 02