Nortel Networks 6.1 manual Pause, Long Tones, While on a call, press

234 / Using System features

Tip - If your Norstar system is connected to a private branch exchange (PBX), program Link onto a memory button for one-touch access.

Pause

The Pause feature enters a 1.5-second delay in a dialing sequence￿on‡°an external line. This is often required for signaling remote devices, such as answering machines, or when reaching through to PBX features or host systems.

You can program more than one pause in an external autodial or speed dial sequence.

The Pause symbol (›) uses one of the 24 spaces in a dialing sequence.

For pulse dialing, •inserts a 1.5-second pause into the dialing sequence.

Long Tones

The Long Tones feature allows you to control the length of￿a tone°‚°so that you can signal devices such as fax or answering machines which require tones longer than the standard 120 milliseconds.

1.	While on a call, press	.
2.	Press the dialpad buttons to produce the appropriate tones. Each tone
	sounds for as long as you hold down the button.

Compact ICS 6.1 System Coordinator Guide ￿°‚° P0603544 02

Long tones can be used on any call except a conference call. You can use internal lines of the Norstar system to activate a device connected to an analog terminal adapter (ATA) in another area of your office, or external lines to access devices outside the Norstar system.