Nortel Networks 6.1 manual Cold starting the KIM, Unplug and replug the T7316E line cable

Compact ICS 6.1 System Coordinator Guide

Answering calls / 51

Cold starting the KIM

If your KIM fails, or if you want to erase programming on the KIM, there are two types of cold start.

TIPs - If you are cold starting an eKIM that has line or Hunt group assignments, the cold start will erase current programming, and insert the line appearances, starting with the top, left button. After all the line appearances are assigned to lines, the system adds target line or Hunt Group appearances. If any buttons are left, the system will populate the buttons with autodialer assignments.

Use	to view button assignments after a
cold start.

For both types of cold starts:￿•‚

1. Unplug and replug the T7316E line cable.

The telephone will restart and all the icons will flash. When the telephone icons stop flashing, the KIM module icons start flashing.

2. At this point, do one of the following:

• KIM single-module cold start

If you just want to cold start an individual module, on that module, simultaneously press the two top and two bottom buttons on the lower button set, as shown in the following diagram. The KIM displays a random pattern of icons as the KIM resets.

P0603544 02