Nortel Networks 6.1 manual Changing button programming, Display buttons used in button programming

166 / User Preferences

User Preferences programming is available under User Preferences under the heading Terminals&Sets.

Sub-headings in User Preferences

User prefernces

Model

Button prgrming

User speed dial

Call log opt’ns

Dialing opt’ns

Language

Display cntrst

Ring type

Changing button programming

Press ≠at Button prgrming. The display shows the number of buttons on the telephone (an example is shown in Displays at the end of this section).

If the telephone has a CAP module, you can press CAP1 or KIM1 to see the buttons on the module.

Press ‘to move through all the buttons on the telephone. Refer to ‘‘Default button assignments’’ on page 161 for button number mapping for each type of Business Series Terminal and Norstar M-series telephones.

Use the display buttons to change the programming for a button. User Preferences programming cannot change the buttons that are used by lines, intercom, and the handsfree feature, which are assigned by the system administrator. Refer to the Compact ICS 6.1 Installer Guide for details.

The display buttons used in button programming

CANCL Moves you out of a setting without making any changes to it.

CLR Erases the button.

TEL# Programs the key as an autodial number for an internal or an external number. If it is an external autodial number, you have to choose a line, line pool, or the routing table for the call to use.

Compact ICS 6.1 System Coordinator Guide P0603544 02