Nortel Networks 6.1 manual Programming or changing CCR destinations

96 / Auto Attendant

Programming or changing CCR destinations

1. Press •°‹‹and enter the System Coordinator password (the default password is ¤‹fl›fl).

Testing your￿custom System•Answer•and CCR

2. Press NEXT until the display shows CCR tree. The choices are SHOW, EXIT, and PREV.

3. Press ≠. The display shows Dial 0: and the current destination when the caller presses zero. Your choices are CHNGE and

NEXT.

4. Press CHNGE to select the appropriate destination.

Each number from zero to nine and	can direct a call to the attendant
telephone or one of the nine CCR groups. The		can be set up to make
the system play the CCR greeting again (Repeat). If a digit is set to None,
it has no destination.
Using NEXT and CHNGE, select the destinations for the remaining digits.

If you have more than one external line, you can call in to hear your greetings by dialing the number used by external callers to call the attendant set or a line that is answered using CCR.

To call systems with only one external line, you must go to a telephone that is not connected to your system.

Compact ICS 6.1 System Coordinator Guide P0603544 02