Nortel Networks 6.1 manual Button.¤‹fl›fl¤flfl‹››, Changing handsfree answerback for a telephone

Answering calls / 69

A handsfree/mute button is automatically assigned to a Norstar or BST telephone that is programmed with handsfree and is always located in the lower right-hand corner of the numeric dialpad.

For T7208 and T7316 telephones, this button is a handsfree-only button. The mute button is in a separate location on the telephone.

The handsfree setting for T7316E only displays Auto or None. The handsfree button on this set is located under the dialpad. If Handsfree is set to None, the handsfree button does not function. Also, if the T7316E is attached to a system with software older than version 6.1, it acts like the T7316 telephone, and the handsfree button is not active.

Changing handsfree answerback for a telephone

Handsfree answerback allows you to answer a voice call without lifting the handset.

It is always turned off for an M7100 or T7100 telephone.

You can turn handsfree answerback on or off for a telephone that is programmed to use handsfree.

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.		Press	.
2.		Press	(the default System Coordinator password).
3.		Press ≠and enter the internal number of the telephone you
		want to program.
4.		Press ≠twice.
5.		Press ‘four times.
6.		Choose a setting (Yes or No) at HF answerback: using the CHANGE
		button.¤‹fl›fl￿••¤flfl‹››
P0603544	02	Compact ICS 6.1 System Coordinator Guide