Nortel Networks 6.1 manual Changing passwords, Clearing a Call Log password

226 / Using System features

Changing passwords

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press	.
2.	Press	(the default System Coordinator password).
3.	Press ‘four times. Passwords displays.
4.	Press ≠.Call Log pswds displays.
5.	Press ‘until you see Progrming pswds ˆ.
6.	Press ≠. Sys Admin: displays.
7.	Press ‘until you see the name of the password you want to
	change.
8.	Use ≠, CHANGE and the dialpad to enter the new password.
	Press OK to accept the new password.

You cannot￿¤‹fl›flerase••or eliminate¤flfl‹››the ability to program passwords.

Clearing a Call Log password

If an individual has forgotten their Call Log password, you can clear it in programming. The individual can then enter a new password from his or her telephone.

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press			.
2.	Press	(the default System Coordinator password).
3.	Press ‘four times. Passwords displays.
4.	Press ≠.Call Log pswds displays.
5.	Press ‘until the display shows Call log pswds.
6.	Press ≠and enter the internal telephone number of the
	telephone where you want to clear the Call Log password.
7.	Press ≠, then press CLR to clear the password.
Compact ICS 6.1 System Coordinator¤‹fl›fl￿••¤flfl‹Guide			››	P0603544 02