Nortel Networks 6.1 manual Using an auxiliary ringer, Full

232 / Using System features

6.Press ≠twice.

7.Use CHANGE to select one of the three options: None, Partial and

Full.

Using an auxiliary ringer

An auxiliary ringer is a separate device that has to be connected to Norstar. Refer to the section on installing optional equipment in the Compact ICS 6.1 Installer Guide.

Turning the auxiliary ringer for a telephone on or off

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press	.
2.	Press	(the default System Coordinator password).
3.	Press ≠at Terminals&Sets.
4.	Enter the internal number of the telephone you want to program and
	press ≠. The display shows Capabilities.
5.	Press ≠.
6.	Press ‘until the display shows Aux. ringer.
7.	Use CHANGE to select Y (Yes) or N (No).

Your installer￿¤‹or••¤flfl‹››customerfl›flservice representative can program the auxiliary ringer to start ringing for incoming lines as part of Ringing Service.

Compact ICS 6.1 System Coordinator Guide P0603544 02