Nortel Networks 6.1 manual Hunt Group, Assigninga distinctive ring pattern to a

Programming Hunt Groups / 179

6. Press to exit or ‘to continue programming.

Assigning®a distinctive ring pattern to a

Hunt Group

You can assign distinctive ring patterns to your Hunt Group so that calls can be rated in priority for the group. These distinctive ring patterns, have the same characteristics as for line and extension distinctive ring patterns. Refer to ‘‘Changing the ring on the telephone’’ on page 168.

The Hunt Group distinctive ring pattern determines how a call will ring within the Hunt Group. If members of the group have ring patterns assigned to their telephones that are higher than the ring patterns of the incoming line or the Hunt Group, then the Hunt Group will use the ring of the corresponding member telephones.

If the incoming call (line) has a higher ring pattern assigned than the Hunt Group, the Hunt Group will ring with the line ring pattern.

1. Find the heading Hunt groups.

2. Press ≠. The display shows Show group.

3. Enter the Hunt Group number you want to program (1-30).

4. Press ≠.The display shows Member DNs:.

5. Press ‘until the display shows Dstnct Ring:NONE.

6. Press CHANGE to toggle to the ring pattern number you want to assign to the Hunt group line. (None, 2, 3, 4)

7.	Press	to exit or ‘to continue programming.
P0603544 02	®	Compact ICS 6.1 System Coordinator Guide