Nortel Networks 6.1 manual Using Set lock, Changing Set Lock programming for a telephone

Using System features / 231

indicator to the other two parties. See ‘‘Using Silent Monitor’’ on page 180.

Using Set lock

Set lock limits the ways in which you can customize your telephone. There are three levels of Set Lock: Full, Partial, and None (no set lock). With no set lock, you have access to all features on your telephone.

Partial prevents:

•	programming autodial	•	changing dialing modes
	buttons		(Automatic Dial, Pre-Dial,
• programming user speed dial			and Standard Dial)
	numbers	•	using Voice Call Deny
•	programming feature buttons	• saving a number with Saved
•	moving line buttons		Number Redial
•	changing the display
	language

Full, in addition to the restrictions outlined for Partial lock, prevents:

•	changing Background Music	• using Call Forward all calls
•	changing Privacy	•	using Send Message
• changing Do Not Disturb		•	using Trunk Answer
•	using Ring Again	•	activating Services

Changing Set Lock programming for a telephone

You need the programming template found at the front of this guide. See ‘‘Getting started with Norstar’’ on page 15 for more information.

1.	Press		.
2.	Press	(the default System Coordinator password).
3.	Press ≠at Terminals&Sets and enter the internal number of
	the telephone you want to program.
4.	Press ≠.
5.	Press	‘until the display shows Restrictions.
P0603544 02		¤‹fl›fl￿••¤flfl‹››	Compact ICS 6.1 System Coordinator Guide