Nortel Networks 6.1 manual Business Series Terminal buttonss

Getting started with Norstar / 19

Business Series Terminal buttonss

	2	1
7
	6	5	4
3
8
9		4
10 11

1	Display	Shows instructions for everyday calling as well as for
		programming.
2	Display buttons	Have a variety of uses. The current use is shown on the
		display above each button.
		Used for dialing numbers when you are making calls.
3	Dialpad	For programming, the dialpad is also used for entering
		numbers and letters
4	Memory buttons	Dial a number or feature code stored on the button.
5	Feature button	Allows you to enter a feature code while using or
		programming the telephone.
6	Hold button	Puts an active call on hold.
7	Release button	Hangs up an active call or ends programming.
8	Volume rocker	Turns the volume you hear through the handset up or
		down. During programming this switch is used to adjust
switch
		settings, such as for the display contrast.
9	Mute	Mutes the transmitter in the handset.

P0603544 02 Compact ICS 6.1 System Coordinator Guide