Nortel Networks 6.1 manual Customizing your KIM module, KIM multi-module cold start

52 / Answering calls

•KIM multi-module cold start

If you want to cold start all the KIMs

attached to your telephone, simultaneously press the top two buttons on the upper button set, and the bottom two buttons on the lower button set, as shown in the following diagram.

Customizing your KIM module

You can move external lines, target lines or hunt group appearances onto

the eKIM by using	. See ‘‘Moving line buttons’’ on page
162.	￿•°⁄

Any of the buttons on your KIM that do not select lines can be programmed to dial internal or external numbers automatically. You also still can program features directly onto KIM buttons. Refer to ‘‘Time savers for making calls’’ on page 97 and ‘‘Customizing your telephone’’ on page 147 for information about programming memory buttons.

eKIM button programming for CAP

Any lines and target lines assigned to the T7316E, which overflow to the eKIM, must be assigned by your installer. You can, however, use the Coordinator password to assign the telephone to the hunt groups for which you want to provide an appearance. Refer to ‘‘Programming Hunt Groups’’ on page 171 for information about programming hunt group appearances.

Designating features or autodial numbers to the eKIM buttons, can be programmed using the Button progrmng, which is found under User Preferences under Terminals&Sets.

You need the programming template found at the front of this guide.

1.	Press		.
2.	Press	(the default System Coordinator password).
	Terminals&Sets displays.
Compact ICS 6.1 System Coordinator¤‹fl›fl￿••¤flfl‹››Guide			P0603544 02