Nortel Networks 6.1 Release button, Hearing aid compatibility, Monitoring telephones from the CAP

Answering calls / 53

3.Press ≠. Show set: displays.

4.Enter the DN number of the T7316E which is attached to the eKIM you want to program, then press OK.

5.Press ≠. Capabilities displays.

6.Press ‘two times until User preferences displays.

7.Press ≠. Model displays (7316E+<n>KIM).

8.Press ‘. Button progrming displays.

9.Press the KIM softkey for the KIM for which you want to program buttons.

If no KIM softkeys appear, it means the KIM was not configured as a CAP in programming.

10.Press ‘until you find the button you want to program.

11.Press TEL# to enter an autodial number or Hunt group DN or press FEATR to enter a feature code and feature programming. To make the button blank, press CLR.

Monitoring telephones from the CAP

The indicator icons beside the buttons on the CAP show the status of system telephones or lines that are configured on the CAP. Refer to ‘‘What line indicators mean’’ on page 44 icons.

Release button

Pressing	ends a call. You do not have to put the handset down.
also ends feature programming.
While you are on a call, do not press		to end a feature you are using. If
you do, you disconnect the call. Use		instead.

Hearing aid compatibility

The handsets on all Norstar and BST telephones are compatible with
hearing aids as defined in the FCC rules, Part 68, section 68.316. Not all
hearing aids are optimized for use with a telephone.
P0603544 02	®	®￿	Compact ICS 6.1 System Coordinator®Guide