Nortel Networks 6.1 manual Default button assignments, Rules of default button assignment

Customizing your telephone / 161

Default button assignments

Default features are assigned automatically to the programmable buttons on Norstar telephones and vary depending on the telephone. The default features are listed in the tables in this chapter.

Rules of default button assignment

•Line and Intercom buttons are assigned by default templates and can be changed in programming.

•Handsfree/mute and answer DN buttons are not assigned by default. If these features are defined, however, they are automatically assigned to specific buttons, as described on this and the following page.

•None of these buttons can be assigned to M7100 or T7100 telephones.

•The handsfree/mute feature appears on the bottom right-hand button on the M7310 telephone and the bottom button on the M7208 telephone, moving the Intercom button(s) up one position. The Business Series Terminals have a separate mute button, which is located under the numeric dialpad, beneath the volume rocker button. The T7316E telephone also has a handsfree button beside the mute button, however, this button only works if the telephone is connected to a system that is version 6.1 or later.

•Each telephone can have up to eight answer DN buttons. On the M7310 and T7316/T7316E telephones, they appear above Intercom buttons in the right column and continue up from the bottom in the left column, replacing the features on those buttons. On the M7208 and T7208 telephones, answer DN buttons appear above the Intercom buttons and below external line buttons in a single column.

•External line buttons appear in ascending line order, starting at the top button in the left column of the M7310 Norstar and M7208 and T7208 telephones. If more than five external lines are assigned to an M7310 telephone, or more than 12 to an M7324 telephone, assignment continues down the buttons on the right column, erasing the features on those buttons. Line buttons have priority over feature access buttons but not handsfree/mute, intercom, or answer DN buttons. The T7316 starts lines at button 01, which is the fourth button down, on the left side of the lower button set.

The T7316E starts line numbering at button 09, which is the left top corner of the lower button set. Refer to the default charts for specific button placement for these telephones.

P0603544 02 Compact ICS 6.1 System Coordinator Guide