Nortel Networks 6.1 manual Using Callback

			Transferring calls / 117
Displays
			The person you were talking to has already
	Already parked
			parked your call. You cannot park the same call.
			You have attempted to use Call Park with no
	Get call first
			active call on your telephone. If the call you want
			to park is on hold, reconnect to it before you park
			it.
			You have entered an invalid retrieval code.
	Invalid number
			There was no call on the retrieval code you
	No call on: 101
			entered.
			You have tried to park a conference call. Split the
	Park denied
			conference and park the calls separately. The
			person who retrieves the calls can reconnect the
			conference.
			Record the code shown. Use Page (	)
	Parked on: 402
	PAGE	EXIT	or press PAGE to announce the call and its
			retrieval code.
	Parking full		All available retrieval codes are in use. Transfer
			the call or take a message instead.

For other displays, see ‘‘Common feature displays’’ on page 253. ￿fl‚

Using Callback

When you direct a call you have answered to another telephone, the system monitors the call to make sure it is answered. If no one answers the call within a set length of time, the system directs it back to you.

Callback generates a variety of displays. Most occur after a set delay and are listed in the index. Some occur immediately if the telephone to which you are directing a call is out of service or otherwise unavailable. These are listed with the descriptions of the specific features like Transfer or Camp-on.

P0603544 02 Compact ICS 6.1 System Coordinator Guide