LOREX Technology LH010 ECO BLACKBOX SERIES instruction manual Using the PTZ Menu Local DVR

Appendix B: Connecting a PTZ Camera

3Configure the following according to your PTZ camera’s specifications:

•Channel:SelectthechannelthePTZcamera is connected to.

•Protocol: Select from Pelco-D or Pelco-P

•Baud rate: Select the PTZ camera’s baud rate

•Data Bit: Select from 5~8 data bits.

•Stop Bit: Select from 1 or 2 stop bits.

•Parity: Select from None, Odd, Even, Mark or Space.

•Cruise: Select Enable to enable PTZ cruise.

•Address: Enter the PTZ camera’s address Use the Copy To drop-down menu to copy the PTZ settings to multiple channels.

4Click Apply to save your settings.

Using the PTZ Menu (Local DVR)

To control the PTZ camera locally on your DVR:

1Select the channel that the PTZ camera is connected to.

2Right-click and press the PTZ button (). Enter the system password. The PTZ menu opens.

3Use the on-screen PTZ controls to control the camera.

Channel:

Select the channel the PTZ camera connects to.

Speed Slider:

Increase or decrease the pan and tilt speed

Direction keys:	Click the + and - symbols to	Camera Pre-set
Click to pan and tilt the camera	adjust the camera Zoom,	controls
	Focus and Iris settings

PTZ Presets and PTZ Cruise

You can set preset positions for your PTZ cameras. You can also use PTZ cruise to have the camera automatically cycle through presets.

101