Nortel Networks 6.1 manual Rings you may hear, FlashrateindicatorsforT7316eandKIMicons

Answering calls / 45

The T7316E telephone displays a set of icons in place of flashing arrows when it is connected to a system with version 6.1 or newer software. If you connect a T7316E telephone to a system that is running version 6.0 or previous versions, the standard line indicators display.

The KIM module also displays some of these icons. Note that this piece of hardware is only supported by version 6.1 and later software.

Active call	The line is active and/or you are connected to
	this telephone.
Ringing	A call is coming into this line.
,
Hold	The call on this line is on Hold at this
	telephone.
Call forward	The call on this line has been forwarded.
Active button	The feature assigned to this button is active.
FlashrateindicatorsforT7316eandKIMicons
On, not flashing	You are connected to the call on that line or the
	line is in use elsewhere or the service
	indicated is active
Off	The line is free
Flashing on and off for equal	Existing alert rate
lengths of time
Flashing on and off more	I-hold
quickly (twinkle)
Flashing on for longer than off	U-hold
(blink)

Rings you may hear

A double beep every 10	A call has been camped to your telephone.
seconds
A long single ring	There is an external call on the line for you.
A shorter double ring	There is an internal call on the line for you or
	a call is being transferred to you.
A brief single ring	A call is being redirected on one of your
	redirected lines. You cannot answer this call.

P0603544 02 Compact ICS 6.1 System Coordinator Guide