Panamax 5300 owner manual Feature Overview

FEATURE OVERVIEW

Switched Outlets Pushbutton:	LED Indicators:	Meter Light Dimmer:
1 of 2 Triggers that can activate a	Status indicator lights	Controls brightness
turn-on or shutdown sequence for	for Switched Outlets,	of the Voltmeter
Outlet Bank 2 and High-Current outlets.	DC Voltage Trigger,	backlighting.
	Ground OK,
	Line Fault
	and Unsafe Voltage

Voltmeter:

Backlit analog meter measures incoming voltage source from 0-150 VAC.

Convenience Outlet: Provides a quick convenient way to plug in components such as camcorders and video game systems.

15A Circuit Breaker: Opens in the event that equipment plugged into the MAX® 5300 draws too much current. When the white button of the breaker is visible, the breaker has opened. Reduce the load and push to reset.

Filtered Outlet Bank 1: Four Always-On, Balanced Double L filtered outlets for audio/video components that require constant power to maintain programmed settings.

Filtered Outlet Bank 2: Four switched, Balanced Double L filtered outlets for audio/video components that do not require constant power.

High-Current Outlet Bank: Two delayed outlets designed for high-current components such as amplifiers and powered subwoofers. The current available to connected equipment is not limited by the noise filtration components.

Satellite Coax Jacks: Two pairs of gold plated F-Connectors optimized for Satellite TV signal line protection.

Cable TV Coax Jacks: Two pairs of gold plated F-Connectors optimized for Cable TV and non-ampli- fied Rooftop Antenna signal line protection.

IEC Main	Ground Lug:	Voltage Sense
Power	Provides a	Trigger Input:
Receptacle:	common	1/8 inch Mini-Plug jack.
Power cord	grounding point	Connect to a remote trigger
connects to this	for equipment	device that provides 12VDC to
receptacle.	with separate	trigger a startup/shutdown
	ground leads.	sequence. This is the second
		trigger that will activate the
		MAX® 5300 turn-on or shut-
		down sequence. (See switched
		outlets pushbutton on front
		panel).

Voltage Sense	High-Current	Outlet Bank 2 Turn-	Telephone Jacks:
Trigger Output:	Outlets Turn-On	Off Switch:	In/Out connections
1/8 inch Mini-Plug jack.	Switch:	3-position slide switch.	for telephone line or
Connecting a 12VDC trig-	3-position slide switch.	Allows adjustment of the	pay-per-view line
ger to the Voltage Sense	Allows adjustment of	Turn-Off delay for Outlet	protection.
Circuit will allow the same	the Turn-On delay for	Bank 2. Choose
signal to pass through the	the two High-Current	between Always-On,
Voltage Sense Output to	Outlets. Choose	10 and 30 seconds.
control the startup/shut-	between 0, 10 and 30
down of an additional	seconds.
device.

4 1690 Corporate Circle, Petaluma, CA 94954 • www.panamax.com