Nortel Networks 6.1 manual Common feature displays, 1234567890123, 3921

Common feature displays

You may see the following displays when you use a feature.

Access denied

Denied in admin

Feature timeout

Inactive feature

Invalid code

Not available

Set locked

Someone is already using programming, or the feature you are trying to use is not compatible with the configuration of the telephone or line.

You have tried to use a feature, but you have not been given access to it in administration programming.

You have taken more than 15 seconds to press a button in response to a display.

You have entered a feature code that is used by an application program that your system does not have.

You have entered an invalid feature code.

You have tried to use a feature that is not available in the present setup of your Norstar system.

You cannot use the feature you have chosen because your telephone is locked. See ‘‘Using Set lock’’ on page 231.

	1234567890123...		Press £or press VIEW‚ or ·VIEW to view a
	VIEW‚	OK	number that is too long to fit on the display. Press
				or OK when you are finished.
			This indicates a long distance call. (May be
	§
			available with Call Display services.)
			Either you are receiving an internal call from
	39>21
			telephone 39 forwarded by telephone 21 or you
			have an Answer button for telephone 21 and an
			internal call from 39 is ringing on 21.
			You are connected to an internal call. Press
	21
	TRANSFER		TRANSFER to transfer the call.
			You are receiving a call from telephone 21.
	21 calling
			￿
P0603544 02				Compact ICS 6.1 System Coordinator Guide