GB
31
GB
30
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛Before presetting a recording, check that the date and
time are correct.
1Insert the cassette and press TIMER on the remote control.
Result: The timer programme is displayed.
2Press
❿!
to select the input source.
3Select the required station by pressing the
"
,
❷
buttons.
4Press
❿
to select the recording day.
5Select the required day by pressing the
"
or
❷
buttons.
6Press
❿
to select the recording start time.
7Select the required hour value by pressing the
"
or
❷
buttons.
8Press
❿
to select the minutes.
9Select the required minute value by pressing the
"
or
❷
buttons.
10 Press
❿
to select the recording stop time.
11 Select the required recording stop time by pressing the
"
or
❷
buttons, following the same procedure as when selecting the
recording start time.
12 Press
❿
to select the recording speed.
13 Press the
"
or
❷
buttons to select the SP (Standard Play), LP
(Long Play), AUTO(Auto Tape Speed Select) recording speeds.
14 When you have finished, press the RETURN button.
15 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
23
456
SHUTTLE
STANDBY/ON OPEN/CLOSE
AUDIO
MODE/
REPEAT
TV/VCR
CLOCK/
COUNTER
15
1/JAN TUE 12:09
PR DAY START
→
STOP
1 SA 912:00
→
12:50SP
-- ------:--
→
--:----
-- ------:--
→
--:----
-- ------:--
→
--:----
-- ------:--
→
--:----
-- ------:--
→
--:----
"❷
➛❿
SET:
❿
RETURN DELETE:CLEAR
Recording a Programme with Automatic Stop
This function enables you to record up to ninehours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4Select:
◆
The station to be recorded using the
PROG(
"
or
❷
)
buttons
or
◆The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The channel number is displayed and the programme
can be seen on the television.
5Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6Hold the REC button (
●
) down for a while to start recording.
Result: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 36).
7Press the REC button (
●
) several times to increase the recording
time in:
◆30-minute intervals up to four hours
◆1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
8If you wish to cancel the recording before the end, press
STANDBY/ON.
☛If the end of the tape is reached while recording:
◆The recording stops
STANDBY/ON SELECT COPY
PROG REC
EJECT
OPEN/CLOSE
L
AUDIO
R
VIDEO
LINE IN 2
3
DVD VCR INPUT SEL.
VIEW
TRK PROG
DISPLAY
REC
DISC MENU
F.ADV/STEP
DIGEST
4
4
REC
DISC MENU
SETUP
/ENTER
RETURN TITLE SUBTITLE MARK
A.DUB SPEED TIMER INDEX
6
5
VCRVCR
LENGTH 2:30
SET LENGTH :
PRESS REC●