GB
21
GB
20
Clearing a Preset Station
If you have stored a TV station:
◆That you do not require
◆At the wrong programme position
you can cancel it.
1Press the SETUP button on the remote control.
2Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
INSTALLATIONoption.
3Press the ENTER button to select this option.
Result: The INSTALLATIONmenu is displayed.
4Press the corresponding
"
or
❷
buttons, until the MANUAL SET
UPoption is selected.
5Press the ENTER button to select this option.
Result: The TV STATION TABLEmenu is displayed.
6Press the corresponding
"
or
❷
buttons, until the required preset
TV station is selected. (PR)
7Press the CLEAR button.
8Repeat the same procedure from Step 6onwards until all the
required stations have been cleared.
9On completion, press the RETURN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
"❷
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN
"❷!!
➛!!!❿
ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER
Presetting the Stations Manually
☛You do not need to preset the stations manually if you
have already set them automatically.
1Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
INSTALLATIONoption.
3Press the ENTER button to select this option.
Result: The INSTALLATIONmenu is displayed.
4Press the corresponding
"
or
❷
buttons, until the MANUAL SET
UPoption is selected.
5Press the ENTER button to select a MANUAL SET UPoption.
Result: The TV STATION TABLEmenu is displayed.
6Press the
"
or
❷
buttons to select a programme number as
required.
7Press the
❿!
button to preset the station.
Result: The MANUAL TUNINGmenu is displayed.
8Press the
➛
or
❿
buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9Press the
"
or
❷
buttons until the NAMEis selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the
❿!
button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the
"
or
❷
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
❿
or
➛
buttons
previous character respectively.
12 If you... Then...
Wish to store the ◆Press the
"
or
❷!
buttons until the MFT
station displayed is selected.
◆Press the
➛
or
❿
buttons to adjust the
picture, if necessary.
◆Press ENTER to store the station
Do notwish to ◆Press the
"
or
❷
buttons until the
store the station CH is selected.
displayed ◆Press the
➛
or
❿
buttons to go on
scanning the frequency band and display
the next station
◆Go back to the beginning of Step 12
13 Repeat this procedure from Step 6onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
☛You do not need to preset the stations manually if you
have already set them automatically.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER
TV STATION TABLE
PR CH NAME
1
2
3
4
5
"❷
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
PR :
CH : ---
MFT : -
NAME : ----
"❷!!!
➛❿!!!
MEMORY:ENTER
RETURN
MAIN MENU
INSTALLATION
RETURN
"❷!!
➛!!!❿
ENTER
Program Clock Install Exit
DVD VCR Option Language
Install