GB
25
GB
24
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding
"
,
❷!
or
➛
,
❿
buttons to select the
USER SEToption.
3Press the ENTER button to select this option.
Result: The USER SETmenu is displayed.
4Press the corresponding
"
or
❷
buttons, until the IPCoption is
selected.
5Press the
❿!
button to select the IPC (intelligent picture control)
option.
➢When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
6To adjust the sharpness manually, press the
❷
button to turn the
IPC mode OFF.
7Press the
➛
or
❿
buttons until the picture is displayed according to
your preferences.
➢If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8On completion, press the RETURN button again.
VCR
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢
◆When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
USER SEToption.
3Press the ENTER button to select this option.
Result: The USER SETmenu is displayed.
4Press the corresponding
"
or
❷
buttons, until the COLOUR
SYSTEMoption is selected.
5Press the
❿
button to select AUTO
➝

PAL

➝

MESECAM

➝
B/W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6On completion, press RETURN twice to exit the menu.
VCR
NICAM
VCR
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 34.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
USER SEToption.
3Press the ENTER button to select this option.
Result: The USER SETmenu is displayed.
4Press the corresponding
"
or
❷
buttons, until the NICAMoption
is selected.
5To... Press
➛
or
❿
, until...
Mono mode OFFis displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode ONis displayed.
ON: Normally set at this position.
6On completion, press RETURN twice to exit the menu.
MAIN MENU
USER SET
RETURN
"❷!!
➛!!!❿
ENTER
Program Clock Install Exit
DVD VCR Option Language
Option
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
RETURN
"❷!!
➛!❿
MAIN MENU
USER SET
RETURN
"❷!!
➛!!!❿
ENTER
Program Clock Install Exit
DVD VCR Option Language
Option
AUTO
PAL
MESECAM
B/W
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
RETURN
"❷!!
➛!❿
ON
OFF
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
RETURN
"❷!
➛!❿
ON
OFF
MAIN MENU
USER SET
RETURN
"❷!!
➛!!!❿
ENTER
Program Clock Install Exit
DVD VCR Option Language
Option