Nortel Networks 6.1 manual Creating a Conference Call, Disconnecting one party

Answering calls / 61

Creating a Conference Call

You can talk to two people at once.

1.Make sure you have two calls, one active and one on hold.

2.	Press	.
3.	Press the appropriate button to retrieve the held call (this is automatic
	on the M7100 and T7100 telephones).
You can create a conference when you are on a call.
1.	Make a second call.
2.	Press	.
3.	Press the button where the first call is on hold to create a conference.

Only the person￿‹who established the conference can process the conference by using the procedures described in this section.

Tip - You can create a conference by releasing privacy on a call. See ‘‘Turning Privacy on or off for a call’’ on page 70.

Disconnecting one party

You can disconnect one party from a conference and continue talking to the
other.
On the telephone you are using for system programming:
1.	Press	￿‹the line button of the call that you want to disconnect. The call
	that you want to keep is automatically put on hold.
2.	Press		. The call is disconnected.
3.	Press the line button of the held call to speak to the remaining person.
P0603544 02		®	Compact ICS 6.1 System Coordinator Guide