Nortel Networks 6.1 manual 174 / Programming Hunt Groups

to exit or ‘to continue programming.

174 / Programming Hunt Groups

5.Press MOVE to move an existing member to another place within the Hunt Group. The display shows the member number followed by an arrow.

6.Enter the new position number for the extension.

7. Press

Assigning®or unassigning lines to a group

You can assign one or several lines to a hunt group.

Hunt group line notes:

• Configure the prime set for a Hunt Group line to None to avoid delayed ring transfer of external Hunt Group calls to the prime set before the Hunt Group can receive the call.

• A line can be assigned to only one group.

• Do not assign any hunt group lines to individual telephones. If any of the telephones that are part of the hunt group have the line assigned, remove the line from the telephone before assigning it to the hunt group.

1. At Hunt groups, press ≠. The display shows Show group.

2. Enter the Hunt Group number you want to program (1-6) or press

‘to scroll through the groups.

3.Press ≠. The display shows Member DNs:.

4.Press ‘. The display shows Line assignment.

5.Press ≠. The display shows Show line:.

6.Enter the line number you want to program and press SCAN to go to the first line assigned to this group, or press LIST to go to the first line in the system.

7.Press CHANGE to program the line as Unassigned or Assigned. *HGnn* means the line is assigned to another Hunt Group.

8. Press	to exit or ‘to continue programming.
Compact ICS 6.1 System Coordinator®Guide		P0603544 02