Muratec MFX-1200, MFX-1600 Option Off, Resolution ← /→ /Enter, Enter Sub-Address, Enter Password

Advanced features

Note: If changing a previously stored command, skip to step 7.

5 Press until Communication appears.

Type :Communication

←/→ /Enter

6 Press ENTER. The LCD now shows either:

P2:Fax#/Advan.Func.		P2:Fax#/Advan.Func.
_	or	9-5558743_

7 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

P2:Fax#/Advan.Func. 9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or to scroll to the right.

Important: Do not press ENTER.

8 Now, while you still can see the fax number on the LCD, press ADVANCED FUNCTIONS three times and then press ENTER. The LCD shows:

Enter Sub-Address

_

9 Use the numeric keypad to enter the ITU-Tsub-address for the box to which you want to send the document. Here, we ve entered 123456:

Enter Sub-Address 123456_

10 Press ENTER. The LCD shows:

Enter Password

_

Note: If there isn t a password for this box, press ENTER, then skip to step 13.

11 Use the numeric keypad to enter the appropriate ITU-Tpassword for the box. Here, we ve entered 654321:

Enter Password 654321_

When finished, press ENTER.

12	If you want the transmission to begin immediately every time you press the
	key, press ENTER and skip to step 15.
	If you want to delay the transmission, press ADVANCED FUNCTIONS, ENTER.
13 Next, tell your fax to carry out this delayed command one of these ways:
	Option 1:		Perform the command once at a certain time on a certain day of
			the month. (For example, Do this at 5:05 PM on the 30th. )
			To select this option, use the numeric keypad to enter the date
			and time when the fax should perform the command:
				Delayed
				Enter Time: 30/17:05
	Option 2:
			Perform the command at a certain time each day you press the
			key. (For example, Do this at 5:05 PM today. )
			To select this option, use the numeric keypad to enter 0, 0 and
			then the time when the fax should perform the command:
				Delayed
				Enter Time: 00/17:05
14 Press ENTER, ENTER.
15	The LCD asks if you want to make additional settings for this programmable
	one-touch number.
		Option		:Off
		← /→		/Enter
	If you do not want to make additional settings, press ENTER. Skip to step 29.
	If you do want to make additional settings, press and ENTER.
16	The LCD asks which resolution you want to use for this programmable one-
	touch number.

Resolution :------

←/→ /Enter

17 Press until the mode you want appears.

Note: For any of the following settings, choose ----- if you do not want to

specify the displayed setting for this programmable one-touch key.

3.42