Muratec MFX-1600, MFX-1200 manual Tcr

						Getting started
Level one function	Level two function	Level three function	Summary of setting	Default setting	Page
B. User Settings	2.Fax Settings	03.# of Rings	Number of rings before your machine answers.	Two times	4.4
		04.Redial	Number of times and interval for automatic fax redialing.	Two times	4.5
				One minute
		05.Dialing Pause	Dialing pause length.	Two times	4.5
		06.Memory Tx	On/Off setting for Memory transmission.	On	4.2
		07.Quick Memory Tx	On/Off setting for Quick Memory transmission.	On	4.2
		08.TTI Tx	On/Off setting for sending your TTI.	On	4.2
		09.ECM Mode	On/Off setting for ECM mode.	On	4.1
		10.Block Junk Fax	Reject the fax reception from unauthorized incoming faxes.	Off	3.54
		11.Security Rx	Keep all received fax messages in memory and after print them.	Off	3.50
		12.PIN Mode	Prevent unauthorized long-distance calls.	Off	3.52
		13.Passcode	Enter passcode for limiting polling access.		3.16
		14.Rotate Rx	On/Off setting for Rotate Rx.	Off	4.4
		(for MFX-1600 only)
		14.DRD (for MFX-1200)	Set the ring pattern to use with phone company s Distinctive Ring	Off	3.24
		15.DRD (for MFX-1600)	service.
	3.Copy Settings	01.Scan Parameters	You can set the following settings for copying.
			Primary document type	Text	4.6
			Primary contrast mode	Normal
		02. Print parameter	You can set the margin for copying.	24 mm	4.6
		03.Auto Reset Time	Set the time (minutes) of resetting the copy parameters.	3 minutes	4.7
		04.Copy Auto	Set the default setting to Auto for one of the following:	Paper size	4.7
			Paper size Reduce/Enlarge ratio Document size
		05.Copy Protect	On/Off setting for Copy protection.	Off	2.18
		06.Sort Copy	On/Off setting for Sorting copy	On	2.16
		07.Nega/Posi	On/Off setting to reverse copy of black and white areas.	Off	2.16, 4.7
		08.Combine	On/Off setting to combine.	Off	2.17, 4.7
		(for MFX-1600 only)
	4.Printer Settings	01.TCP/IP*3	Enter the IP Address, Subnet mask and Gate way address.		4.11
C. Other Settings	1.Journal & Reports	01.Journal Auto Print	Print the Activity journal automatically after 100 transactions.	Off	3.21
		02.Journal Line Up	Change the printing order of the activity journal.	Off	3.22
		03.Set Report Type	Select TCR (Transmit Confirmation Report) or	TCR	3.22
			RCR (Receive Confirmation Report).
	2.Cover Page	01.Set Cover Page	On/Off setting for sending the Cover page.	Off	3.23
		02.Enter Cover Page	Enter your message for the cover page.		3.24

*3: This option appears only if the optional NIC (network interface card) has been installed.

1.15